3D printers · Creality
Owners keep their Ender v3 printers as a base to build on. The accounts we have mostly show people wanting to upgrade theirs, not replace them.
The one recurring theme is about upgrading. Owners of the Ender v3 SE and v3 Plus said they wanted to take their own machines further after seeing a heavily modified one. There are too few accounts to call this clear praise.
No recurring complaint came up. The only theme, upgrade desire, includes one mixed account, and that is too thin to count as a criticism of the printer.
The Creality Ender-3 V3 is a desktop 3D printer that builds plastic parts layer by layer from a 1.75 mm filament spool. It is aimed at hobbyists and first-time users who want a fast, low-cost home printer. It ships mostly assembled.
| Build volume | |
|---|---|
| Printer type | FFF filament printer, CoreXZ gantry |
| Max speed | 600 mm/s |
| Nozzle temperature | 300 °C |
| Bed temperature | 110 °C |
| Enclosure | |
| Auto bed levelling | |
| Warranty |
From the maker's spec page, checked October 10, 2026. A blank row means the maker does not state it.
600 mm/s is the printer's top speed. It can finish simple parts quickly, but you will usually print slower when you want good detail. A 300 °C nozzle and a 110 °C bed are hot enough for common plastics like PLA, PETG, TPU and ABS, and for carbon-fibre-filled PLA and PETG. Creality's spec page doesn't list the print size, the levelling method or the warranty, so check those before you buy.
Pick up to three. You get a page with just those, side by side, on the subjects owners raised.
The accounts we have describe owners who think of the Ender v3 as something to improve over time. One owner was weighing whether to buy a different printer (a Spark i8) or upgrade their Ender v3 to a similar standard instead. Another, who owns a v3 Plus, wanted a second printer to sit beside it.
Beyond that interest in upgrading, owners haven't said much about daily use. We don't have enough accounts to say what still delights them, what has become routine, or what they had to get used to.
None of the owner accounts we have describe how the Ender v3 holds up: what keeps working, what breaks, or how owners fix problems.
Long-term accounts are thin here. We have no owner reports on durability or repairs, so we can't say how this printer holds up over time.
From 0 owner accounts that said how long they have had it. Own one? Add how long yours has lasted.
Nothing with a clear majority yet. Owners who raised these subjects were split, or too few to judge.
Nothing has a clear majority against it yet. Counted from the owners who raised each subject, not from everyone. A subject is judged once at least 4 owners raise it.
5 more subjects came up from fewer than 4 owners each, which is not enough for a fair reading. To see how it stacks up, compare it with another machine.
The same owner, asked again at each point. Fills in as owners answer.
Two questions: how long you have had it, and anything you would like to say about it. Then we ask again as it ages. This helps our mission.
More in 3d printers: Creality Hi, Bambu Lab X1C, Prusa Mk3.
Among the 0 owner accounts here that gave a duration, 0 described a failure.
Before you buy one used, ask the seller: how old it is, whether it was ever repaired and by whom, and whether any of the parts above have been replaced. Ask to see it run. A receipt tells you the warranty start date; most makers honour the term only for the first owner.
Public discussions we read and summarised in our own words. Nothing here was submitted to Still Kicks.
Counted from public accounts by people who said they own it, and summarised by Still Kicks in its own words. Not a manufacturer claim, a lab test or an estimate.
No account needed to look. Sign in with Google only if you want to track something you own.