3D printers · Anycubic
Owners used the Kobra 2 as a working printer for projects such as props, and some stayed with Anycubic afterwards, moving up to newer Kobra models rather than leaving the brand.
The positive accounts come from owners who want to beta test Anycubic's next machines, which shows loyalty to the brand more than praise of the Kobra 2 itself. Too few owners raised this to judge it either way.
Some owners call the Kobra 2 a frustrating machine to live with. One who also owns a Bambu P1S says the Anycubic is the troublesome one. Too few owners raised this to call it a clear complaint, and one of these accounts is mixed rather than negative.
The Anycubic Kobra 2 is a 3D printer that builds plastic parts one layer at a time from melted filament. It levels its own bed and has a touchscreen. It suits beginners and hobbyists making small to mid-size parts at home.
| Build volume | 250 x 220 x 220 mm (9.8 x 8.7 x 8.7 in) |
|---|---|
| Printer type | FDM |
| Max speed | 300 mm/s (200 mm/s typical) |
| Nozzle temperature | Up to 260 °C (500 °F) |
| Bed temperature | Up to 110 °C (230 °F) |
| Enclosure | |
| Auto bed levelling | Yes, LeviQ 2.0 automatic levelling |
| Warranty |
From the maker's spec page, checked October 10, 2026. A blank row means the maker does not state it.
It can print one piece up to about 22 cm wide and deep and 25 cm tall, roughly a large coffee mug or a small vase. At 260 °C it handles the common plastics PLA, PETG, TPU and ABS. The 110 °C bed helps ABS stay flat on the plate. Expect to print nearer 200 mm/s day to day, not the 300 mm/s top speed.
Pick up to three. You get a page with just those, side by side, on the subjects owners raised.
For some owners the Kobra 2 was one step in a longer printing hobby. A prop maker went from a Creality machine to the Kobra 2 and later upgraded to the Kobra 3. A long-time Anycubic buyer has retired two older Mega printers but still runs six Kobras, a Kobra 2 Max among them. Several of these owners print props and parts and are keen to try whatever Anycubic makes next.
Other owners settled in less happily. One owner of a Kobra 2 Pro, who also has a Bambu P1S, finds the Anycubic the harder of the two to live with and points new buyers to the Bambu. Another remembers their Kobra 2 years with clear frustration. None of the comments describe the daily routine in any detail, such as setup, maintenance or print quality.
The best sign of durability here is the owner whose Kobra 2 Max is still in use next to several other Kobras, while their older Mega machines have been retired. On the other side, the Kobra 2 Pro owner and another former Kobra 2 owner describe it as a source of trouble. Neither says what actually failed, and their way of dealing with it was to compare it unfavourably with a Bambu or to move on to other machines.
The long-term evidence on this page is thin. Only a handful of accounts touch on how the Kobra 2 holds up. They are spread across the base, Pro and Max versions, and none names a specific fault, a repair or a time scale. Treat this page as a few scattered impressions, not a dependable picture of the printer's reliability.
From 0 owner accounts that said how long they have had it. Own one? Add how long yours has lasted.
Nothing with a clear majority yet. Owners who raised these subjects were split, or too few to judge.
Nothing has a clear majority against it yet. Counted from the owners who raised each subject, not from everyone. A subject is judged once at least 4 owners raise it.
14 more subjects came up from fewer than 4 owners each, which is not enough for a fair reading. To see how it stacks up, compare it with another machine.
The same owner, asked again at each point. Fills in as owners answer.
Two questions: how long you have had it, and anything you would like to say about it. Then we ask again as it ages. This helps our mission.
More in 3d printers: Creality Hi, Bambu Lab X1C, Prusa Mk3.
Among the 0 owner accounts here that gave a duration, 0 described a failure.
Before you buy one used, ask the seller: how old it is, whether it was ever repaired and by whom, and whether any of the parts above have been replaced. Ask to see it run. A receipt tells you the warranty start date; most makers honour the term only for the first owner.
Public discussions we read and summarised in our own words. Nothing here was submitted to Still Kicks.
Counted from public accounts by people who said they own it, and summarised by Still Kicks in its own words. Not a manufacturer claim, a lab test or an estimate.
No account needed to look. Sign in with Google only if you want to track something you own.