3D printers · Anycubic
Owners keep it for printing large parts in one piece, which saves them time, material and extra hardware compared with splitting a big model into sections.
Build volume is clear praise. Owners say the large print area makes bigger items possible without splitting them, and one says this has saved time, material and extra hardware.
No recurring complaint appears in the accounts we have. The only theme with enough accounts to tally is build volume, and none of those accounts were negative.
The Anycubic Kobra Max is a large home 3D printer that builds objects layer by layer from plastic filament. It is for hobbyists and makers who want to print big parts, like helmets or cosplay pieces, in one go. Anycubic lists it as sold out on its own store.
| Build volume | 450 x 400 x 400 mm (17.7 x 15.7 x 15.7 in), 72 L |
|---|---|
| Printer type | FDM (filament), Bowden extruder |
| Max speed | 180 mm/s (80-100 mm/s typical) |
| Nozzle temperature | Up to 260°C (500°F) |
| Bed temperature | Up to 90°C (194°F) |
| Enclosure | |
| Auto bed levelling | Yes (LeviQ auto-levelling) |
| Warranty |
From the maker's spec page, checked October 10, 2026. A blank row means the maker does not state it.
The 450 x 400 x 400 mm build space is large enough for a full-size helmet or several big parts at once. Its 180 mm/s top speed is slow next to newer printers, so big prints can take a day or more. A 260°C nozzle and 90°C bed work for everyday plastics like PLA, PETG, TPU and some ABS. Automatic levelling means you don't have to adjust the bed by hand before each print.
Pick up to three. You get a page with just those, side by side, on the subjects owners raised.
What keeps people using it is the size. Owners who make functional parts, prototypes and assemblies say the larger pieces they need come off the bed whole, so they skip the work of cutting a model into sections and joining it afterward. One owner has run Kobra Max machines for a while and still points to this as the reason.
The accounts say little about daily routine or what people had to adjust to, so we won't guess. We can say that owners describe a mix of uses: toys, household parts, high strength parts and very large display pieces. Some run more than one machine, and one owner with three units (Kobra Max 2 models) says the work still piles up.
The accounts we have say nothing about what breaks, what needs repair, or what owners do to keep the printer running. No failure or fix was described, so we are not reporting any.
Long-term evidence is thin. One owner says they have run Kobra Max machines for a while, and others have printed for years in general. But those accounts talk about what the printer can make, not how it has held up over months of use. Treat reliability as unknown for now.
From 0 owner accounts that said how long they have had it. Own one? Add how long yours has lasted.
Nothing has a clear majority against it yet. Counted from the owners who raised each subject, not from everyone. A subject is judged once at least 4 owners raise it.
4 more subjects came up from fewer than 4 owners each, which is not enough for a fair reading. To see how it stacks up, compare it with another machine.
The same owner, asked again at each point. Fills in as owners answer.
Two questions: how long you have had it, and anything you would like to say about it. Then we ask again as it ages. This helps our mission.
More in 3d printers: Creality Hi, Bambu Lab X1C, Prusa Mk3.
Among the 0 owner accounts here that gave a duration, 0 described a failure.
Before you buy one used, ask the seller: how old it is, whether it was ever repaired and by whom, and whether any of the parts above have been replaced. Ask to see it run. A receipt tells you the warranty start date; most makers honour the term only for the first owner.
Public discussions we read and summarised in our own words. Nothing here was submitted to Still Kicks.
Counted from public accounts by people who said they own it, and summarised by Still Kicks in its own words. Not a manufacturer claim, a lab test or an estimate.
No account needed to look. Sign in with Google only if you want to track something you own.