3D printers · Anycubic
Owners keep the Kobra X as a fast-starting, easy multicolor printer that handles everyday materials well, and owners coming from older Anycubic machines call it a clear step up.
Owners clearly praise it overall. They call it a great machine, and one plans to replace their Kobra S1 printers with it because it is more reliable and starts up very quickly.
No recurring complaint came up. None of the themes drew a negative account. The closest thing to a fault is one owner's report that slot 2 once failed to beep when filament was fed in, and the problem went away.
The Anycubic Kobra X is a home 3D printer that builds plastic parts layer by layer from a spool of filament. It has four colours built in and can be extended to 19, so it suits hobbyists who want multi-colour prints without changing filament by hand.
| Build volume | 260 × 260 × 260 mm |
|---|---|
| Printer type | FDM, direct drive; 4 colours built in, up to 19 |
| Max speed | 600 mm/s (300 mm/s recommended) |
| Nozzle temperature | 300°C max |
| Bed temperature | 100°C max |
| Enclosure | |
| Auto bed levelling | Yes, LeviQ 3.0 auto-levelling with Z-offset |
| Warranty | 1 year |
From the maker's spec page, checked October 10, 2026. A blank row means the maker does not state it.
You can print objects up to about 26 cm on each side, so a full-size helmet won't fit, but most toys, tools and household parts will. A 300°C nozzle and a 100°C bed handle common plastics like PLA, PETG and TPU, plus tougher ones like ASA. The printer levels its own bed, so you won't have to adjust it by hand before each print. The 600 mm/s figure is the top speed. Anycubic suggests 300 mm/s for normal use.
Pick up to three. You get a page with just those, side by side, on the subjects owners raised.
Once the novelty passes, owners keep coming back to how easy it is to run. One owner who came from a Kobra 2 Neo says they didn't expect to use the color change, then found themselves switching between PLA and PCTG. Another, who runs several of these printers, points to four colors out of the box (expandable to 19) and says it wastes about half the filament an A1 does. On a first full-plate test with an old, cheap spool, one owner got a perfect first layer in just over an hour.
For some owners it has become an everyday workhorse. One runs several in a print farm next to Bambu P2S machines. Another keeps it on LAN only, connected through KX-Bridge, because they want to avoid Bambu's ecosystem. One adjustment to plan for is size: one owner was struck by how big the printer is.
The accounts that cover use over time are positive. One owner has logged 630 printing hours and 18 kg of filament and says it still prints TPU, PLA, PETG and ABS smoothly. Another chose it over their Kobra S1 printers partly because it has been more reliable. The only glitch reported was a single missed beep on filament slot 2, and it cleared up. The control board and wiring problems in the same comments are about an older Anycubic Mega S, not this printer.
Long-term evidence is thin. Only a few owners talk about reliability at all, and the longest account here is the 630-hour one. One owner also mentions a small YouTuber who was still happy with the printer after two or three months. That is too little to say how it holds up over years of use.
From 1 owner account that said how long they have had it. Own one? Add how long yours has lasted.
Nothing has a clear majority against it yet. Counted from the owners who raised each subject, not from everyone. A subject is judged once at least 4 owners raise it.
19 more subjects came up from fewer than 4 owners each, which is not enough for a fair reading. To see how it stacks up, compare it with another machine.
The same owner, asked again at each point. Fills in as owners answer.
Two questions: how long you have had it, and anything you would like to say about it. Then we ask again as it ages. This helps our mission.
More in 3d printers: Creality Hi, Bambu Lab X1C, Prusa Mk3.
Among the 1 owner accounts here that gave a duration, 0 described a failure.
Before you buy one used, ask the seller: how old it is, whether it was ever repaired and by whom, and whether any of the parts above have been replaced. Ask to see it run. A receipt tells you the warranty start date; most makers honour the term only for the first owner.
Public discussions we read and summarised in our own words. Nothing here was submitted to Still Kicks.
Counted from public accounts by people who said they own it, and summarised by Still Kicks in its own words. Not a manufacturer claim, a lab test or an estimate.
No account needed to look. Sign in with Google only if you want to track something you own.